|
|
1.Clean the ground |
2.Draw the line |
3.Install pedestal |
4.Adjust horizontal |
5.Connect stringer |
6.Install panel |
7.Seam the edges |
8.Clean the panels |
| |
Below are the
installation steps of access floor:
1. Clean the ground
2. Draw line on the ground to
demarcate the pedestal situation
3. Install pedestals
4.
Adjust horizontal
5. Connect stringers, make them level and then
screw bolts tightly
6. Install panels
7. Seam the edges
8.
Clean the panels after job is
finished |
|
 |
